Visualizer2 v2.0.4 AU AAX VST VST3 x64 WiN MAC, x64 windows vst3 plugins vst plugins nugen audio macos plugins au for mac aax plugins, x86, x64, Win, VST3, VST, Visualizer2, Visualizer, Standalone, R2R, MAC, AU

Visualizer 2 v2.0.4 WiN MAC

TEAM R2R | 09.09.2017 | WiN: 14 MB | MAC: 75 MB

PLATFORM : WiN64 – VST/VST3/AAX | MacOSX – AU/VST/VST3/AAX

Powerful, flexible Audio Analysis, giving you immediate access to precisely the information you need, when you need it, through a unique, intelligent window system. Measure, understand, correct. Visualizer gives you indispensable audio analysis for quality audio production, with a standardised reference set of professional tools that let you work faster, avoid mistakes, repeat past success and leverage the success of others. Visualizer’s unique intelligent window facility lets you select multiple view combinations, automatically resizing and aligning windows to maximise legibility and cross referencing information across screens. No need to switch between plugins to get the combination of views you want. User configurable presets let you switch instantly between setups and interface sizes to build the workflow that suits you.

Comprehensive audio analysis

  • Multiple level meters (Peak/RMS/K12/K14/K20 etc.)
  • FFT Spectrum Analysis
  • Stereo Spectrum Analysis
  • Spectrogram
  • Stereo Spectrogram
  • Vector Scope
  • Stereoscope
  • Stereo Bias meter
  • Correlation Meter
  • Correlation by frequency
  • Stats and Parameters module

Comparison Mode
Comparison mode allows the direct comparison of two sources within a single Visualizer interface, utilising overlay, side-by-side and differential views. Ideal for examining the difference before and after a mastering signal chain or for comparing spectra in preparation for EQ matching or notching out.

Detailed user configuration

  • Resizeable Interface
  • Intelligent window optimization
  • Optimized control selection
  • Frequency zoom and scroll
  • dB Zoom and scroll
  • Peak hold control
  • Colour selection
  • FFT window selection
  • RMS window adjustment
  • Optimized resource use

Intelligent window System
This unique facility allows the selection of multiple view combinations, resizing and aligning windows to maximize legibility and cross referencing information across screens. There is no need to switch plugin for a different combination, and presets (user configurable) allow instant switching between setups and interface size enabling unparalleled work flow enhancements and intuitive operation.

INFO/DEMO/BUY: https://mage.si/2Z5F
Visualizer2 v2.0.4 AU AAX VST VST3 x64 WiN MAC
http://beelink.in/24334/Visualizer2-v2.0.4-AU-AXX-VST-VST3-x64-WiN-MAC.html

ABU2 v2.6.0 WiN P2P, x86 plugins vsti x64 plugins vsti windows vsti vst3 plugins plugins rtas software audio aax plugins, Win, VSTi, VST3, VST, RTAS, P2P, App, ABU2, AAX

ABU2 v2.6.0 WiN

P2P | 29 August 2017 | 2.25 GB

APP/VST/VSTi/VST3/RTAS/AAX

Virtual Upright Bass Instrument

Ample Bass Upright is a virtual upright bass instrument. ABU has a 4.26 GB sample library which is naturally recorded on every single fret. No destructive editing and dynamic processing are applied. Features 6 articulations: Sustain, Mute, Natural Harmonic, Hammer On & Pull Off, Legato Slide, Slide in & out. The Legato articulations can be used to achieve legato notes of any duration, speed, pitch and polyphony. Alternate Tuning.

Features:
– New sample engine applied to both plugged and unplugged
– ABU is designed from the ground up to be the most versatile bass virtual instrument available today with a new level of expressiveness. ABU not only performs as an extraordinary acoustic instrument by playback partially from mic samples, but also as an electric instrument by playback partially from DI samples, creating a more dynamic and subtle playing experience. Furthermore, users can mix and process Mics and DI separately to get a variety of sound.
– Multiple stereo and mono modes
– ABU uses more mics to record every detail of upright bass from neck, body and ambience and provides 2 stereo modes and 2 mono modes on mix interface. Users can adjust volumes of mics and width to get more options in stereo mode, in which ABU has rich expressiveness even for solo. For mono modes, ABU can play an important role of middle-low end in a band steadily.
– Fretless slide system
– Different from any other product of Ample Sound, ABU’s slide mechanism is designed specifically for fretless instrument which can reproduce the smoothness of fretless legato with any duration, speed, pitch and polyphony.
– New designed EQ
– New designed EQ can process Mic and DI channels separately. By highlighting strong parts while avoiding weak parts, it can further refine sound.
– Tab Player
– Redesigned Tab Player for bass tab. All articulations and notations are supported by the tab player. Realistic Tab playback can be achieved through fine parameter adjustments and humanizations.

 



INFO/DEMO/BUY: https://mage.si/0ba7
ABU2 v2.6.0 WiN-P2P
http://beelink.in/31631/ABU2-v2.6.0-WiN-P2P.html

ABP2 v2.6.0 WiN P2P, x86 plugins vsti x64 plugins vsti windows vsti vst3 plugins plugins rtas software audio aax plugins, Win, VSTi, VST3, VST, RTAS, P2P, App, ABP2, AAX

ABP2 v2.6.0 WiN

P2P | Sept 07 2017 | 2.32 GB

APP/VST/VSTi/VST3/RTAS/AAX

Ample Bass P II aim to bring the Fender Precision Bass sound to your studio.

Sampling:
– 2851 Samples, Size: 3.60 GB, 24bit 44.1khz
– DFD(Direct from disk)
– Rich Fingering Noise – more vivid and realistic
– Each Cycle & Rhombic Sampling structure – Separate sample cycle for each note and vel layer to improve sample utilization
– Sustain, Palm Mute, Natural Harmonic, Hammer On & Pull Off, Legato Slide, Slide in & out, Slapping, Popping, Tapping, Accentuated, Staccato, Dead Note 14 articulations, Legato at random length & pitch & poly

Technology:
– New technology: Auto Buzz system
– Groovy Single-Note bass line
– Alternate Tuner & lowest to B
– Capo Logic – Intelligent play according to bass rules.
– CPC(Customized Parameters Control), any button knob etc can be controlled by MIDI CC or Automation
– Poly Legato
– Slide Smoother
– Combined Keyswitches – combine 2 articulations via pressing 2 keyswitches at the same time
– Open String First Function
– Manual vibrato wheel designed specifically for string instruments
– Capo – Transpose without need to modify midi.

What’s new:
New features:
– Add Multi-Measure feature in Riffer.
– Add Clear measure, Copy Measure, Clear All features in Riffer right-click menu.
– Change Riffer UI.
– Update Riffer dice scales in Ample Metal Ray5.

Fixed bugs:
– Fix missing Slide Out on 3rd fret G string.
– Some buttons lose text label when inserting value 0.
– Sometimes note can’t stop playing when played on fretboard.
– Note with high velocity breaks in Solo Mode.
– Poblems importing MIDI to Riffer.
– Logic gets stuck when dragg-and-dropping Pitch Bend from Riffer into host.
– Sometimes minor third Slide Up becomes to minor second when exporting Riff to MIDI.
– Note can be moved out of range in Riffer.
– Note cannot stop playing when moved holding shift.
– Note can change length or overlap when moved across other notes holding shift.
– Riffer cannot load preset when Preference window is closed.

INFO/DEMO/DEMO: https://mage.si/zSCk
ABP2 v2.6.0 WiN-P2P
http://beelink.in/31633/ABP2-v2.6.0-WiN-P2P.html

dpMeterXT v1.1.8 AAX VST VST3 STANDALONE x86 x64 WiN CE V.R, x86 x64 windows vst3 plugins vst plugins software audio aax plugins, x86, x64, Win, VST3, VST, V.R, Standalone, Meter, dpMeterXT, CE, AAX

dpMeterXT v1.1.8 WiN

Team V.R | Sept 02 2017 | 4.6 MB

AAX VST VST3 STANDALONE x86 x64

dpMeterXT is a loudness metering plugin and application fully compliant with the EBU R128, ITU-R BS.1770/1771, ATSC A/85 and several other regionspecific loudness standards. dPMeterXT supports multiple channel configurations, from 1.0 up to 9.1/10.0, depending on your system configuration or DAW capabilities. It features large readouts, meters, graphs, measurement history anddatalogging. With dpMeterXT, you can define the measurement parameters in a very detailed way (i.a. integration time, gating levels, filter).

Features:
– click-free 64-bit internal processing
– multi channel metering: up to 10 channels, multiple channel configurations
– supports all relevant loudness measurement standards
– multiple presets
– integrated, short term, momentary, TP/peak and LRA/PLR
– True Peak measurement based on ITU BS1770
– K/A/B/C/M/user-defined weighting filter
– continuous/synced measurement
– record metering results as automation data
– large and accurate live meters
– loudness history graph
– reports and CSV data export
– scalable GUI
– customizable GUI colors
– adjustable pre-gain
– loudness/peak/True Peak matching

1.1.8:
– PLR: switchable integrated/short term peak to loudness range
– Graph: fixed crash during display update

INFO/DEMO/BUY: https://mage.si/kAh0
dpMeterXT v1.1.8 AAX VST VST3 STANDALONE x86 x64 WiN CE-V.R
http://beelink.in/33680/dpMeterXT-v1.1.8-WiN-CE-V.R.html

Impress v1.9.9 AAX VST VST3 RTAS x86 x64 WiN V.R, windows vst3 plugins vst plugins plugins rtas aax plugins, x86, x64, Win, VST3, VST, V.R, RTAS, Impress, AAX

Impress v1.9.9 WiN

Team V.R | Sept 01 2017 | 3.6 MB

AAX VST VST3 RTAS x86 x64

Impress is a wideband stereo compressor including side-chaining, various prefilter options and state-of-the-art over sampling. The goal of the design was to cover a broad range of compression applications in today’s mixing and mastering situations with strong focus on low aliasing. So, Impress could be used to shape subtle a snare sound, glue different tracks on instrument bus and even do complex tasks like deessing or voice over’s.

Features
-Zero latency click-free 64-bit internal processing
-Low aliasing compressor design
-“real” oversampling, up to 8x
-Stereo/left/right/mid/side processing
-External side-chain
-Main signal multiband filter, up to 192 dB/Oct (Linkwitz-Riley design)
-Detector signal prefilter, up to 192 dB/Oct
-2 compressor modes: classic and clean (low aliasing)
-3 gain stage modes: modern, vintage and vintage clean (including thermal noise emulation)
-2 level detection modes: peak and RMS
-Short/long attack/release times
-Low aliasing soft knee
-Lookahead
-Limit gain reduction
-Dry/wet
-Flexible signal monitoring

Changuelog:
1.9.9
– Code optimizations

 

INFO/DEMO/BUY: https://mage.si/jD0B
Impress v1.9.9 AAX VST VST3 RTAS x86 x64 WiN-V.R
http://beelink.in/22941/Impress-v1.9.9-AAX-VST-VST3-RTAS-x86-x64-WiN-V.R.html

AB LM v1.4.8 RTAS AAX VST VST3 WiN V.R, windows vst3 plugins vst plugins plugins rtas aax plugins, Win, VST3, VST, V.R, RTAS, CE, AB LM, AAX

AB_LM v1.4.8 RTAS AAX VST VST3 WiN

Team V.R | Sept 01 2017 | 3 MB

AB_LM is a gain control which enables level matched and sample accurate AB comparison of FX chains. Plugin (FX) or even a complex FX chain to the sound. Most DAWs can easily enable/disable (AB) single plugins or even whole FX chains, but in most case there is an audible loudness difference between both cases. In order to compare the impact of a plugin chain objectively the loudness of the incoming signal should match with the loudness of outgoing signal. Comparing the plugin effect at equal loudness levels avoids the “louder is better” – pitfall.

Mode & Link Channel
Sets the mode of the plugin, either Sender or Receiver and the link channel for the communication. Sender is placed before the plugin(s) which should be AB level matched, Receiver is inserted after.

Latency Compensation
Some plugins add latency to the plugin chain. For a sample-exact AB loudness comparison audio streams need to be synchronized. This can be done automatically (just press PDC button and wait 1-2 seconds) or manually by entering the latency value (in samples).

Pre-FX Loudness
This meter shows the current and maximum loudness of the audio stream just before the plugin(s). Many plugins work best at a certain loudness level (e.g. -18 dBFS)

Post-FX Gain
This meter shows the loudness difference of pre and post-FX signal. The match button lets you set the additional post-FX gain (match mode “manual”) based on current loudness difference. Match mode “Auto” does this automatically.

Match Modes
AB-LM lets you match the loudness either manually, or automatically.
The mode “Gain Stage” works differently: The additional FX drive gain is just removed from the audio stream right after the FX chain for “pure” gain staging purposes.

Snapshot Slots
AB_LM provides 4 snapshot slots to store and recall settings for FX drive and Post-FX gain. So you can test your plugin chain with different gain levels, all loudness matched.

FX Drive
This parameter adjusts the additional pre-FX gain.

AB Switch
This button lets you seamless switch between pre and pre-FX audio signal.

Pre-FX Gain
This meter shows how close the loudness of the incoming signal is matched with a certain reference level. Many engineers work with loudness calibrated audio systems.

Features

  • match pre and post-FX loudness
  • match pre-FX loudness with reference level
  • 3 loudness match modes: manual, auto and gain stage
  • FX chain drive
  • up to 16 sender/receiver pairs
  • automatic latency measurement/compensation
  • adjustable RMS measurement window
  • bypass AB_LM
  • 4 snapshot slots
  • very CPU friendly
  • large and easy to use GUI

Changelog:
1.4.8– AAX: button hang fix

1.4.7
– Code optimizations

INFO/DEMO/DEMO: https://mage.si/MqD4
AB_LM v1.4.8 RTAS AAX VST VST3 WiN-V.R
http://beelink.in/25892/AB-LM-v1.4.8-RTAS-AAX-VST-VST3-WiN-V.R.html

LA xLimit II v1.2.5 AAX RTAS VST VST3 CE x86 x64 WiN V.R, x86 x64 windows vst3 plugins vst plugins plugins rtas aax plugins, xLimit, x86, x64, Win, VST3, VST, V.R, RTAS, LA, CE, Brick Wall, AAX

LA xLimit II v1.2.5 WiN

Team V.R | Sept 01 2017 | 4.6 MB

AAX RTAS VST VST3 CE x86 x64

LA xLimit II is an advanced look ahead, wideband linked-stereo limiter including ISP (inter sample peak) detection and oversampling. LA xLimit II is the successor of LA xLimit, our very popular look ahead limiter. It offers more control over transients and adaptive release curves. It also adds a second limiter stage for better performance in ISP detection mode. The goal of the design was to cover a broad range of limiting applications in today’s mixing and mastering situations with strong focus on low aliasing.

Design
LA xLimit II is specifically designed for mastering, digital editing, multimedia, and any application that requires limiting of the digital signal with top notch quality and lowest aliasing. LA xLimit II guarantees ultra fast and overshot free response by using advanced look ahead algorithms.

In order to fulfill today’s TV, broadcast and music production requirements LA xLimit II offers True-Peak limiting (ISP) based on ITU-1770 specification and on top of it up to 8x “real” oversampling. Combined with True-Peak limiting reaches even highest production standards.

LA xLimit II includes an advanced adaptive release control system which reduces massively artifacts caused by fixed release times. In order to increase limiting sensitivity both stereo channels can be freely linked/unlinked.

LA xLimit II is designed to be used as last plugin in the processing chain (brick-wall limiting).

Changelog:
1.2.5
– Code optimizations

1.2.4
– AAX: parameter change fix

INFO/DEMO/BUY: https://mage.si/4Dm0
LA xLimit II v1.2.5 AAX RTAS VST VST3 CE x86 x64 WiN-V.R
http://beelink.in/25768/LA-xLimit-II-v1.2.5-AAX-RTAS-VST-VST3-CE-x86-x64-WiN-V.R.html

dpMeterXT v1.1.7 AAX VST VST3 STANDALONE x86 x64 WiN CE V.R, x86 x64 windows vst3 plugins vst plugins software audio aax plugins, x86, x64, Win, VST3, VST, V.R, Standalone, Meter, dpMeterXT, CE, AAX

dpMeterXT v1.1.7 WiN

Team V.R | 31 Aug 2017 | 4.7 MB

AAX VST VST3 STANDALONE x86 x64

dpMeterXT is a loudness metering plugin and application fully compliant with the EBU R128, ITU-R BS.1770/1771, ATSC A/85 and several other regionspecific loudness standards. dPMeterXT supports multiple channel configurations, from 1.0 up to 9.1/10.0, depending on your system configuration or DAW capabilities. It features large readouts, meters, graphs, measurement history anddatalogging. With dpMeterXT, you can define the measurement parameters in a very detailed way (i.a. integration time, gating levels, filter).

Features:
– click-free 64-bit internal processing
– multi channel metering: up to 10 channels, multiple channel configurations
– supports all relevant loudness measurement standards
– multiple presets
– integrated, short term, momentary, TP/peak and LRA/PLR
– True Peak measurement based on ITU BS1770
– K/A/B/C/M/user-defined weighting filter
– continuous/synced measurement
– record metering results as automation data
– large and accurate live meters
– loudness history graph
– reports and CSV data export
– scalable GUI
– customizable GUI colors
– adjustable pre-gain
– loudness/peak/True Peak matching

INFO/DEMO/BUY: https://mage.si/kAh0
dpMeterXT v1.1.7 AAX VST VST3 STANDALONE x86 x64 WiN CE-V.R
http://beelink.in/33680/dpMeterXT-v1.1.7-WiN-CE-V.R.html

AGM2 v2.5.1 STANDALONE AAX VST3 VSTi RTAS WiN, x86 plugins vsti x64 plugins vsti windows vsti vst3 plugins plugins rtas software audio aax plugins, Win, VSTi, VST3, Standalone, RTAS, AGM2, AAX

AGM2 v2.5.1 WiN

P2P | 31 August 2017 | 3.26 GB

STANDALONE AAX VST3 VSTi RTAS

Ample Guitar II, a completely recreated program with loads of new features, including: New sample engine with significant performance improvement: *Multiple instances can be loaded much faster and takes only a small amount of additional memory. *Improved voice management significantly enhances performance.

New Strummer with drag & drop support:
*Users can search, browse and audition chords and patterns now with drag & drop support.
*Slash chord support is implemented for Detect Mode.
*Chord slots have been increased to 24 for Select Mode.
*Arpeggio can now be played on all six strings for every chord now.
*Improved humanization options are present in 2.0.
*New strummed patterns.

– VST3 format is now supported for Mac & Windows.
– Added Slide Guitar articulation/group samples for all guitars.
– Improved and optimized GPX format support in the built-in tab player.
– Completely new standalone app which can load all Ample Sound plugins with virtual keyboard support.

Other updates:
*Added capo option which enables transposing without the need of modifying MIDI.
*Added Auto Mod to enable automatic vibrato.
*Added Mod Range to adjust vibrato intensity.
*Added Poly Bender to enable multiple notes bend.
*Added the new Solo Mode, in addition to Keyboard Mode and Standard Mode.

Announcements:
*There will be sample library extensions in future, and this update has been designed to support this feature.
*The current release of Ample Guitar II only covers acoustic series of the product line-up. More changes will be brought about by the electric series, which is coming up soon.

Important Information
Ample Guitar II cannot load presets/settings created/used with previous 1.x version software directly. However, parameters in 2.0 version software cover all parameters in 1.x versions, which means copying details of parameters from 1.x presets to 2.0 software is doable by hand. Users can keep the old version 1.x while installing version 2.0. They can run and exist in parallel.

INFO/DEMO/BUY: https://mage.si/J0Er
AGM2 v2.5.1 STANDALONE AAX VST3 VSTi RTAS WiN
http://beelink.in/33672/AGM2-v2.5.1-STANDALONE-AAX-VST3-VSTi-RTAS-WiN.html

Poll

Please, rate your DAW

Other polls...